CONDITION Stone Soap is a mild cleaning agent for use on all natural stone surfaces. Continued use will enhance the beauty and ensure the best possible look for your stone surface. Provides a natural barrier to dirt and water. Can be burnished for a beautiful finish.
Application:
Dilute 1 to 1.5 oz of CONDITION Stone Soap per gallon of water. Clean floor with mop and bucket or autoscrubber application. After cleaning allow the Stone Soap to dry. Floor may be machine buffed with a white pad to improve the gloss.
Floor may be machine buffed with a white pad to improve the gloss.
Coverage:
Approximately 60,000 ft/gallon
Quick Tip:
Change the solution as needed to make certain only clean solution is being applied to the floor. Occasionally clean floors with Stonecare PRO Signature DEEP CLEAN Deep Cleaning Stripper Degreaser to keep your floors looking their best!
Occasionally clean floors with Stonecare PRO Signature DEEP CLEAN Deep Cleaning Stripper Degreaser to keep your floors looking their best!
CAUTION:
Causes eye and skin irritation. Avoid contact with skin, eyes and clothes. In case of contact, flush thoroughly with water. If irritation persists, seek medical attention. Do not swallow. Keep out of reach of children.
MSDS: Read MSDS for additional safety precautions before using this product. (Click here for Material Safety Data Sheet.)